【中文】全密封油浸式非晶合金配电变压器，以铁基非晶合金铁芯作导磁材料。非晶合金具有高饱和磁感应强度、低损耗（约为硅钢片的1/3～1/5）、低矫顽力、低励磁电流和良好的温度稳定性，是理想的节能"绿色材料"，其空载损耗较硅钢S9系列下降70%～80%，用于油浸变压器还可减排CO₂、SO₂、NOx等有害气体。铁芯采用单框或三相五柱卷铁芯，夹紧采用薄板成型框结构，低压线圈可用铜导线或铜箔绕制，具有损耗低、抗短路能力强、结构先进合理等特点。使用环境：海拔不超过1000m，户内或户外；最高环境温度+40℃，最高日平均+30℃；最高年平均+20℃，最低年平均-25℃。执行GB 1094系列、JB/T 6451等标准。
【English】A fully sealed oil-immersed amorphous alloy distribution transformer using an iron-based amorphous alloy core as the magnetic material. Amorphous alloy offers high saturation flux density, low loss (about 1/3-1/5 that of silicon steel), low coercivity, low excitation current and good temperature stability; it is an ideal energy-saving "green material". Its no-load loss is 70-80% lower than the silicon-steel S9 series, and when used in oil-immersed transformers it also cuts emissions of CO2, SO2 and NOx. The core is a single-frame or three-phase five-limb wound core clamped by a thin-sheet formed frame, and the LV winding can be wound with copper wire or copper foil, giving low loss, strong short-circuit resistance and an advanced, rational structure. Service conditions: altitude no more than 1000 m, indoor or outdoor; max ambient +40 degC, max daily mean +30 degC; max annual mean +20 degC, min annual mean -25 degC. Standards: GB 1094 series, JB/T 6451, etc.
德阳新源电器有限责任公司德阳新源电器有限责任公司始建于1984年，坐落于成都一小时经济圈内的中国名酒之乡——四川省绵竹市富新镇…
