【中文】三相油浸式配电变压器。器身采用高可靠性支承绝缘结构，抗短路能力强；铁芯用优质冷轧硅钢片制成；高、低压绕组均选用优质无氧铜线，绕组间主绝缘结构采用110kV级变压器技术，提高耐受电压能力、降低线圈温升；紧固件经特殊防松与镀锌处理；选用25#优质变压器油作散热与绝缘介质。产品结构新颖、温升低、噪声低、抗短路能力强，与S9系列相比空载损耗、空载电流平均分别下降25%和70～85%，平均温升降低10K，运行噪声降低7～10dB(A)。使用环境：海拔不超过1000m，户内或户外；最高环境温度+40℃，最高日平均+30℃；最高年平均+20℃，最低年平均-25℃。执行GB 1094系列、GB/T 6451等标准。
【English】A three-phase oil-immersed distribution transformer. Its body uses a highly reliable supporting insulation structure for strong short-circuit resistance; the core is made of high-quality cold-rolled silicon steel; HV and LV windings use high-quality oxygen-free copper wire, with 110 kV-class main insulation between windings to raise withstand voltage and lower coil temperature rise; fasteners are specially locked and galvanized; 25# premium transformer oil acts as the cooling and insulating medium. It features a novel structure, low temperature rise, low noise and strong short-circuit resistance; compared with the S9 series, no-load loss and no-load current drop by 25% and 70-85% on average, average temperature rise falls 10 K and noise drops 7-10 dB(A). Service conditions: altitude no more than 1000 m, indoor or outdoor; max ambient +40 degC, max daily mean +30 degC; max annual mean +20 degC, min annual mean -25 degC. Standards: GB 1094 series, GB/T 6451, etc.
德阳新源电器有限责任公司德阳新源电器有限责任公司始建于1984年，坐落于成都一小时经济圈内的中国名酒之乡——四川省绵竹市富新镇…
